LUBRICATION home  
 
Lubrication

In the next paragraph is a table with the lubricants that are recommended / prescribed by Deckel
It's a translation from a scan that was not very clear to read. So beware of errors.

The section that follows describes the replacement lubrication that I use.


" Lubrication table - General lubrication info about Deckel machines "

" The products in these columns are strongly adviced. It is possible to use other lubricants when the
specifications match the specifications in this table "

" The products in this column are selected after many years of testing. Please do not use alternative lubricants "

 

 

Gear and Hydraulic oil

 

Spindle oil

 

Ballbearing lube   Way lubricant

 

ISO VG 46
Visk. 46 mm2/S 40C

ISO VG 10
Visk. 10 mm2./S 40C

Standard Quality

ISO VG 220
Visk. 220 mm2/S 40C
AGIP OGO 45 ---- GR MU 2 EXIDIA 14
ARAL VITAM DE 45 SULNIT CMT ARALUB AR 2 DEGANIT B 220
BP ENERGOL HLP 45 ENERGOL HLP 10 ENERGREASE LS 2 ENERGOL HP-C 220
CASTROL HYSPIN AWS 46 HYSPIN VG 10 SPHEEROL AP 2 MAGNA CF 220
ELF ACANTIS 46 SPINELF 10

GRAISSE ELF TU 2
GRAISSE ELF EP 2

GLISSE LF 220
ESSO NUTO H 46 SPINESSO 10 BEACON 2 FEBIS K 220
FUCHS RENOLIN MR 15 RENOLIN MR 3 RENOLIT MP RENEP 5
HOUGHTON HYDROLUBRIC VG 46 SPEEDLUBRIC VG 10 COSMOLUSE EP 2 WAYLUBRIC VG 220
KLUBER LAMORA HLP 46 CRUCOLAN 10 CENTOPLEX 2 LAMORA SUPER
POLADO 220
MOBIL OIL DTE MEDIUM VELOCITE NR 6 MOBIPLEX 46
MOBILUX 2
VACTRA NO 4
SHELL TELLUS OEL 45 TELLUS OEL C10 ALVANIA 2 TONNA OEL T 220
SUNOCO SUNVIS 821 SUNVIS 826 SUN M.O.2 GREASE WAY LUBRICANT 90
TEXACO RANDO OIL 46

SPINDURA OIL 10
RANDO OIL 10

MULTIFAK
MULTIFAK 20

WAY LUBRICANT 220
 
" The products in this section are selected after many years of testing. Please do not use alternative lubricants "
  Lubricant Manufacturer Type Iso classification
 

Special oil

(Grindinghead spindle )

FUCHS RENOLIN 10  
  Chainoil DOW CORNING MOLYKOTE MKL  
 

Special grease

(spindle bearings )

KLUBER LUBRICATION Isoflex Super TEL  
 

Special oil

(Maintanance)

KLUBER LUBRICATION Kluber TES 527 EP ISO VG 10
Visk. 10 mm2/s 40C
Replacement lubrication
 
These are the lubricants in use for the Deckel FP2 . Most of them obtained from Kroon Oil
  Lubricant Iso classification Manufacturer Type
  Gear and Hydraulic oil ISO VG 46
Visk. 46 mm2/S 40C
Kroon Perlus 32/46
  Spindle oil ISO VG 10
Visk. 10 mm2./S 40C
Kroon Perlus H 15
  Ball bearing lube Standard quality Kroon General lube
  Way oil ISO VG 220
Visk. 220 mm2/S 40C
Kroon Carsinus U 68/220
 

Special oil

(Grindinghead spindle )

--- --- ---
  Chainoil --- DOW CORNING MOLYKOTE MKL
 

Special grease

(spindle bearings )

--- KLUBER LUBRICATION Isoflex Super TEL
 

Special oil

(Maintanance)

ISO VG 10
Visk. 10 mm2/s 40C
KLUBER LUBRICATION Kluber TES 527 EP